FLASHFORGE Rolls Out 13 New Filaments, From Glow-in-the-Dark PLA to Carbon-Fiber Reinforced Nylon

Thirteen New Filaments Under One Brand

APPLE TREE Inc., the Osaka-based company that owns the FLASHFORGE brand, has released a 13-type filament lineup aimed at covering most of what a desktop 3D printing user might need from a single supplier. The range spans everyday PLA through to carbon-fiber-reinforced engineering materials, and includes a couple of options aimed at users who care about material waste and recyclability.

The headline material is PLA Galaxy Luminous, a glow-in-the-dark filament for models, signage, and props that need to absorb light and release it after dark. Carbon-fiber-reinforced variants cover PETG-CF, ASA-CF, PA6-CF, PC-CF, and PPA-CF for users who need stiffness and dimensional stability without switching to a full industrial system. Glass-fiber-reinforced options in ABS-GF, PA6-GF, PET-GF, and PPA-GF sit alongside them for applications where rigidity matters more than impact toughness.

PLA LW is the lightweight entry, designed for parts where density matters: drone components, automotive interiors, anything where saving grams per layer adds up across a large build. Spool-less PLA and R-PLA are the sustainability plays. Spool-less PLA ships without a traditional plastic spool, with the expectation that users will print their own reel from a provided design. R-PLA is the recycled variant. Both are a response to the pile of empty spools that accumulates in any workshop that prints with any regularity.

Tied to the Creator5 Launch

The filament launch coincides with the ongoing promotion around the FLASHFORGE Creator5 series. Buyers who purchase a Creator5 printer between June 30 and August 31, 2026, can enter a draw for spool-less PLA rolls, with a top prize of 20 rolls. All participants receive at least one roll. The promotion runs through APPLE TREE's official online store, not through third-party marketplaces.

The timing is deliberate. FLASHFORGE is pushing the Creator5 as its multi-material flagship, and a broader filament range gives buyers a reason to buy both the printer and the materials from the same ecosystem. The Creator5 uses four independent toolheads and supports multi-material and multi-color printing without the purge towers that bog down single-nozzle systems. A wider filament catalog makes that capability more useful.

What the Range Covers

The full lineup: PLA Galaxy Luminous, PETG-CF, PLA LW, ASA-CF, PET-CF, PA6-CF, PC-CF, ABS-GF, PA6-GF, PET-GF, PPA-GF, Spool-less PLA, and R-PLA. Temperature profiles, diameter tolerances, and compatibility notes are listed on FLASHFORGE's Japanese and international storefronts. Most are 1.75mm diameter, supplied on standard or spool-less formats depending on the variant.

The engineering filaments carry the usual caveats: carbon-fiber and glass-fiber materials are abrasive, hardened steel nozzles are recommended, and print speeds tend to be slower than with unfilled PLA or PETG. The high-temperature materials like PA6-CF and PPA-GF will benefit from an enclosure and heated chamber, which the Creator5 Pro provides. The basic PLA variants will run on any entry-level machine without special setup.

Why It Matters

Filament breadth is becoming a differentiator for printer brands as hardware prices compress. A buyer choosing between four or five machines in the $500 to $1,000 range will often pick the one whose material ecosystem looks most complete. FLASHFORGE already has the hardware; this launch is about making sure the material shelf matches the printer shelf. The spool-less and recycled options also signal that the company is paying attention to the sustainability conversation, even if the practical impact of one less plastic spool per user is modest.